GIEC G5300 Reproductor: Clon Pioneer LX500 con lector UHD óptico

6$ la unidad más los portes -varían dependiendo de la zona-, que creo que me ha dicho que son otros 8 dólares más. 14 dólares (11,8€).

Mañana me confirma el precio final.
 
Finalmente no salió la venta, así que por aquí me quedo por lo menos un tiempo.

You can't downgrade version V3.86, right?
No puede degradar la versión V3.86, ¿verdad?


hay algo en la 3.89 que no te va bien? que te iva bien en la 3.86?
 
No puede degradar la versión V3.86, ¿verdad?


hay algo en la 3.89 que no te va bien? que te iva bien en la 3.86?
Creo que de ahí no puede bajar.
Por eso preguntaba, porque la información sobre este deco está muy liada.
Yo lo que quería era llegar a una versión que me dejara migrar a firm Pioneer.
Ahora estoy en V3.90 y va mejor (por lo poco que probé) que la V3.89.
Por cierto, yo no puedo reproducir ISO por red.
Alguien puede??
Alguien probó ISO desde disco duro externo??
 
Yo lo he probado una iso de un disco Blu-ray uhd creada por mi mismo con el fabdvd, creada igual al original sin ninguna clase de compresión ni reducción de capacidad o contenido, despues migrada a un disco duro y a mí me va perfecto
Por red no he probado
 
Does it work or not ?
Quedé de mandarle yo un disco... y se me olvidó.
Mañana lo haré.
Pero ya te digo yo que no funciona. Por lo menos con el firmware que tenemos nosotros.
Otra cosa es el de Pioneer.
Ahí tengo una teoría que no es más que eso... una teoría.
Me da la sensación que debe hacer lo mismo que algunas unidades del LG UBK90. Yo tuve uno y reproducía discos BDXL pero sólo hasta la segunda capa. Como tuvieran un peso superior a 66 GB's ya no iban.
Eso podría explicar que en las pruebas de Tocinillo reprodujera "Alita", una película que ocupa 64 GB's.
A mí, el LG, incluso me llegó a arrancar BDXL de tres capas, pero en cuanto pasaba a la tercera petaba.
 
Hi, thanks I am waiting to receive the test disc and will tell you than.
I do not think that you can manipulate 3.89 with Pioneer functions at this moment, as the FW is encrypted and you also need that key to upload a firmware to (new) G5300. The Chinese have the SDK tools + keys to manipulate Pioneer to older G5300 fw. Keep in mind that there is no new Bootloader for UPG modus yet too, you can`t recover your player if wrongly updated. Any current Bootloader upload will lockup your player and he won`t boot back to player mode !!! (sorry for 3x ! but I don`t want you to brick you player by trying too, as some dealer did)
 
Última edición:
@Tocinillo
Is the price still 336 USD ?
Never was, its was 369usd and you get only one remote and the player can't change to Pioneer firmware and will come instead with TNT jailbreak firmware. Its stable and work, but less settings option (for OSD language/Audio/HDR-Dolby Vision) than on the Pioneer firmware, wich every one originally ordered.
 
Never was, its was 369usd and you get only one remote and the player can't change to Pioneer firmware and will come instead with TNT jailbreak firmware. Its stable and work, but less settings option (for OSD language/Audio/HDR-Dolby Vision) than on the Pioneer firmware, wich every one originally ordered.
What Audio/HDR-Dolby Vision are missing on TNT firmware ?
 
Hello,

It is great to see more people with the Giec player. I have this player since it was released and it has the Pioneer firmware.

It has 3 major flaws:

1 - One of the biggest problems is that only accepts .ass subtitles for iso blurays and when using this .ass subtitles, it does not show characters like "á, à, é, è, etc".
2 - It is not compatible with sup subtitles embedded in mkv files.
3 - It cannot convert HDR mkv to SDR(for projectors).

Could you test these with the TNT firmware?
 
Mañana haré algunas pruebas para ver si puedo aclarar vuestras dudas.

De cualquier forma decir que en la última actualización de TNT Jailbreak ya se solucionaron los problemas de información en Dolby Vision.
No he hecho una prueba muy a fondo pero, a primera vista, la calidad de reproducción es muy similar a la de Cambridge.

@Nckba cuando comentas que solo admite subtítulos *ass en los ISOS te refieres a subtítulos externos??

Probaré algún mkv con subs en formato *sup y ya comentaré.
 
Más preguntas.

Desde donde estamos es posible instalar firmware oficial de GIEC?

O lo que nos mandó el chino nos tiene atrapados en su versión?
 
He vuelto a conectar el GIEC y he estado haciendo algunas pruebas.
Como comentara antes es imposible conectarse en red por SAMBA. Sí por NFS.
Puedo confirmar los problemas para reproducir los subtítulos en *mkv.
Desde USB no los reconoce. Por red los saca raros (ver imagen adjunta).
Son subtítulos en el *mkv. No he probado con subtítulos externos.

- Imágenes 1 a 6 se puede ver la configuración que tengo yo puesta. La verdad es que no me he parado mucho a configurar.
- Imagen 7. Dispositivos disponibles.
- Imagen 8. Contenido del NAS.
- Imagen 9. Contenido del USB.
- Imagen 10. Reproducción ISO FULL UHD desde USB.
- Imagen 11. Info ISO desde USB.
- Imagen 12. Reproducción ISO (con subs) desde USB.
- Imagen 13. Info MKV desde USB.
- Imagen 14. Info MKV desde NAS.
- Imagen 15. Subs en MKV desde NAS.
- Imagen 16. Contenido de carpeta de NAS con fanart.
- Imagen 17. Información de Dolby Vision desde NAS.

También he probado a reproducir un disco BDXL con una ISO grabada en 2 capas (<66GB's) y no lo reproduce.
 

Archivos adjuntos

  • 1 CONFIGURACIÓN.jpg
    1 CONFIGURACIÓN.jpg
    472.1 KB · Visitas: 109
  • 2 AUDIO.jpg
    2 AUDIO.jpg
    512.9 KB · Visitas: 107
  • 3 HDMI.jpg
    3 HDMI.jpg
    512.3 KB · Visitas: 109
  • 4 RED.jpg
    4 RED.jpg
    551.5 KB · Visitas: 97
  • 5 IDIOMA.jpg
    5 IDIOMA.jpg
    481 KB · Visitas: 115
  • 7 USB.jpg
    7 USB.jpg
    446 KB · Visitas: 101
  • 8 NAS.jpg
    8 NAS.jpg
    469.1 KB · Visitas: 104
  • 9 ISO USB.jpg
    9 ISO USB.jpg
    543.4 KB · Visitas: 108
  • 10 ISO USB.jpg
    10 ISO USB.jpg
    435.6 KB · Visitas: 110
  • 11 ISO USB.jpg
    11 ISO USB.jpg
    456.1 KB · Visitas: 112
  • 12 ISO USB.jpg
    12 ISO USB.jpg
    457 KB · Visitas: 112
  • 13 MKV USB.jpg
    13 MKV USB.jpg
    437.9 KB · Visitas: 120
  • 14 MKV NAS.jpg
    14 MKV NAS.jpg
    404.8 KB · Visitas: 122
  • 15 SUBS MKV NAS.jpg
    15 SUBS MKV NAS.jpg
    410.1 KB · Visitas: 117
  • 16 PELÍCULAS NAS.jpg
    16 PELÍCULAS NAS.jpg
    470.3 KB · Visitas: 127
  • 17 DOLBY VISION NAS.jpg
    17 DOLBY VISION NAS.jpg
    397.2 KB · Visitas: 130
  • 6 VERSIÓN FIRMWARE.jpg
    6 VERSIÓN FIRMWARE.jpg
    478.1 KB · Visitas: 126
@delnorte
Yes I can only use external .ass subtitles with iso images. To use .srt external subtitles it needs to be a mkv file and .srt subtitles supports "á, à, é, è, etc" characters.
 
I asked again for final price of the remote control to other users. And a few questions for the next group purchase.
 
Ok,

- Grupo 2 abierto / Group 2 open!

-
Interesados en el mando original con botones en inglés, por favor, dejadlo puesto aquí citándome, ya que en función de donde viváis el precio varia. Así puedo preguntarle y que me de los precios finales. / Interested in the original remote control with buttons in English, please leave it here quoting me, since depending on where you live the price varies. So I can ask he and give me the final prices.

- Post principal actualizado explicando lo del firmware, etc. / Main post updated with changes about firmware...
 
Atrás
Arriba