Reproductor M9702 (Clon Oppo UDP-203 - Chinoppo)

Perdona que se me ha pasado,sí lo tengo conectado con los hdmi partidos,un hdmi a la C9 y el de audio directamente del reproductor a la Samsung Q90r,desde que tengo el transformador lineal es espectacular el sonido que saca aunque por eARC también se oye muy bien pero preferí aprovechar el hdmi del audio,saludos.
Ya veo, también tengo así mí configuración y he notado que la segunda salida dedicada de audio da mejor calidad. También intenta volver a poner en auto la opción de DV, con tú C9 le da preferencia siempre al TV-Led.

No tuviste inconveniente con el transformador con su conector? Me interesa comprarlo pero viendo los problemas que unos tuvieron en los primeros envíos de hace un año que no coincidía o conseguir un adaptaor lo deje a un lado, podrías poner la liga del modelo que adquiriste?
 
Ya veo, también tengo así mí configuración y he notado que la segunda salida dedicada de audio da mejor calidad. También intenta volver a poner en auto la opción de DV, con tú C9 le da preferencia siempre al TV-Led.

No tuviste inconveniente con el transformador con su conector? Me interesa comprarlo pero viendo los problemas que unos tuvieron en los primeros envíos de hace un año que no coincidía o conseguir un adaptaor lo deje a un lado, podrías poner la liga del modelo que adquiriste? Ok mañana te lo busco,yo no tuve problemas,eso sí yo no pedí el talema,te mando el enlace,saludos
 
DC12V-2.5A
V-230 V
Así lo pedí yo y me vino perfecto,tengo el 9702 V3 pero un amigo mío tiene el 9201 y pidió la misma y sin problemas.
 
DC12V-2.5A
V-230 V
Así lo pedí yo y me vino perfecto,tengo el 9702 V3 pero un amigo mío tiene el 9201 y pidió la misma y sin problemas.
Ok, también tengo un V3, veo que no es Tallema pero si te ha dado excelentes resultados entonces pediré éste.

Gracias por la info.
 
Me informé bien antes de pedirla,mi cuñado es electromecánico y le pedí consejo precisamente por los problemas de algunos foreros,le mostré fotos de ámbas,tanto de la Talema y la mía,él me recomendó la que compré,pues pude compararla en condiciones porque también tengo un reproductor Panasonic 820 que utilizo para ver apps y discos originales que poseo,que a su vez también tengo conectado exactamente igual que el 9702,por hdmi partido,pues bien me descargué los Full de algunas películas que tenía originales para comparar y el audio es exactamente el mismo,todo un éxito,claramente mejoró, apenas se calienta y yo le meto caña porque veo muchas películas en Atmos y Dts:x que es lo que más exigente,ya me dices que tal cuándo la tengas,saludos.
 
Buenas ,

Tengo una duda,como este modelo no tiene HDMI In como el nuevo , sera que eres posible una solución como esta para ultrapasar ?

La idea eres conectarlo a una box con coreelec , y usarlo /procesarlo el signal externo con chinoppo.


 
Buenas,a mí me pasa una cosa muy extraña últimamente...en configuración hdr lo tengo en auto y el procesamiento dolby vision en tv-led,el problema que tengo es que en archivos que son Dolby Vision originales me los lee cuando le da la gana pero la mayoría de veces me salta el logo pero se queda la pantalla en negro,¿tenéis el mismo problema alguno de por aquí? Saludos.
En la configuración de Salida HDR en el ChinOPPO subiste o modificaste algún parámetro? me refiero a Nitidez, Brillo Matiz etc etc. eso me pasaba algunas veces cuando lo había modificado. Ahora lo dejo en 0 completamente y nunca mas me dio un error como el que nos contas. y ya estoy cercano a los 2 años de tener el M9702 Funcionando perfectamente
 
Pues siempre tengo +1 en nitidez,de todos modos lo observaré,saludos.
Bueno en HDR poner +1 le da una mejora en algunas películas, pero en Dolby Vision se me ponía la TV en Negro o directamente no arrancaba el Bluray UHD y no se cuantos errores mas.

Hice 2 Modos MODO1: Para HDR con +1 en Nitidez
MODO2: todo en 0 para Dolby Vision

También note que para que no me de error tenia que: Poner todo en 0, apagar el Chinoppo y la TV … 2 minutos después prender todo y ahí lo tomaba perfecto.

PD. Esos errores los hacia en 1 de cada 5 películas Bluray UHD con Dolby Vision.

Así lo tengo hasta el Dia de Hoy
 
Bueno en HDR poner +1 le da una mejora en algunas películas, pero en Dolby Vision se me ponía la TV en Negro o directamente no arrancaba el Bluray UHD y no se cuantos errores mas.

Hice 2 Modos MODO1: Para HDR con +1 en Nitidez
MODO2: todo en 0 para Dolby Vision

También note que para que no me de error tenia que: Poner todo en 0, apagar el Chinoppo y la TV … 2 minutos después prender todo y ahí lo tomaba perfecto.

PD. Esos errores los hacia en 1 de cada 5 películas Bluray UHD con Dolby Vision.

Así lo tengo hasta el Dia de Hoy
Buena información,ya comentaré que tal me funciona y si sigo tu procedimiento,saludos.
 
El M9702 reproduce perfectamente Dolby Vision, lo que puse mas arriba es para cuando quise tenerlo en modo TV-Led
al modificar Nitidez u otro parámetro 1 de cada 5 películas en Bluray UHD D.V me dio ese pequeño error.

Pero si se lo dejara en Auto, en mi caso, nunca tuve ningún error.

Saludos
 
¿Que color de subtítulos soléis utilizar en HDR/DV?

Como los blancos deslumbran tanto en Oled yo suelo ponerlos en azul oscuro, pero no me terminan de convencer. Y tampoco hay posibilidad de ponerlos grises, que sería mi elección ideal.
 
¿Que color de subtítulos soléis utilizar en HDR/DV?

Como los blancos deslumbran tanto en Oled yo suelo ponerlos en azul oscuro, pero no me terminan de convencer. Y tampoco hay posibilidad de ponerlos grises, que sería mi elección ideal.

Verde. El amarillo tambien me gustaba, pero me he pasado al verde. Suave y relajante a la vista.
 
Os voy a exponer lo que creo que he averiguado,después de varios días el reproductor haciéndome la puñeta parece que ya quiere funcionar como es debido,tengo una C9 por si alguno más le ocurre lo mismo o le sirve de ayuda.Yo tengo 2 Modos también,el Modo 1= +1 en nitidez para Dolby Vision y Sdr y Modo 2= +1 en nitidez y + 1 en brillo para Hdr,lo de añadirle 1 punto de nitidez lo hago por lo que dijo Tocinillo que le iba bien y el punto de brillo para Hdr es porque en el televisor le he bajado el brillo a 49 porque he visto en algunas películas macrobloques,sólo en Hdr y así compenso lo que le quito al televisor y no hay rastro de ellos.Dicho esto,he llegado a la conclusión que lo que pasaba en Tv-Led en Dolby Vision era porque no conmutaban el televisor y el reproductor en el momento de iniciarse,siempre encendía el reproductor y después el televisor,pues bien,ahora lo hago al revés,enciendo primero el televisor y seguidamente el reproductor,cuando me sale arriba a la derecha la pestaña del hdmi que está disponible la pulso con el puntero del mando,no espero a buscarla en los hdmi cuando desaparece,lo hago de inmediato porque son unos segundos,desde que hago esto me funciona a la más absoluta perfección,he probado varias veces,¡¡¡esperemos que dure!!! Yo siempre lo tengo en Auto y el procesamiento de Dolby Vision en Tv-Led (claramente mejor que en Auto) y el modo pues siempre lo dejo en Modo 1,sí una película me salta en Hdr directamente pulso el botón Setup y lo cambio al Modo 2,de la otra manera con Dolby Vision no deja cambiar de modos sí no es saliendo de la película.Saludos
 
....,enciendo primero el televisor y seguidamente el reproductor,....

Independientemente de los problemas adicionales que puedan surgir por otros motivos, esa secuencia es siempre la correcta.

El "HDMI handshake" entre dispositivos sirve para que un reproductor (hdmi source) pregunte a un display (hdmi sink) sobre sus capacidades (EDID). Si el reproductor pregunta y el display todavía no ha arrancado o no "sabe" responder bien, el reproductor se quedará con algún ajuste por defecto y puede que lo reintente después o no cuando el display arranque.

Así el orden correcto de encendido de aparatos es siempre de final a principio de toda la cadena HDMI, dando tiempo a que cada aparato arranque del todo:

TV -pausa- AVR -pausa- Reproductor (Suponiendo que el reproductor se conecta a un hdmi del AVR y la salida del AVR a una entrada de la TV).
 
Hello,
I hope someone can help me.
I want to update my V3 with the firmware of the first page.
All steps work except the last "upg usb be all" step.
I tested many different usb drives and computer but without success.
Does anyone know where the issue is?

Here the log:
preloader_v.35156
[t:0x317063]
[PLL] mt_pll_init.
[PLL] mt_pll_init done.
[nand] u4flag=0x0
[nand] ckgen=0x0, _fgUsingDMA:0x0
after setting :*NFI_ACCCON : 0x31c08222 , *NFI_CLK_SEL:0x1051000
[fgBootLoaderHeaderVerification] read page correcte able and read success
r_adv_boot_cfg:
u4HeadSig HDMI_DBG Tray_type FastEject Dram_Size AcOnStby EnL2 DramChAuto HighPhysOffset CoreOffStr DrmkOnlyOff LGFEJMICOM u4EndSig
0x95175346 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000001 0x00000000 0x00000000 0x00000001 0x0009e000 0x00000000 0x78945612
Set PIN RTC_SDA High For MT8581
CFG = 0x1 : 0
[0x0009e000] [0xfb010000]
Should switch some SRAM to normal access...
DDR_Initialize start
u4BLDramCfg= 0x0, u4Tmp = 0x0
[PLL] mempll_init
[PLL] target freq = 900
SSC DOWN : 0x1e901e9 , 0x9
SSC -1.5%
[PLL] mempll_cali
[dram] mpll = 55 MHz
[mempll] mempll2 ref = 55 MHz
[mempll] mempll2 fbk = 55 MHz
[mempll] mempll2 vco = 1787 MHz
[mempll] mempll3 ref = 55 MHz
[mempll] mempll3 fbk = 55 MHz
[mempll] mempll3 vco = 1788 MHz
[mempll] mempll4 ref = 55 MHz
[mempll] mempll4 fbk = 55 MHz
[mempll] mempll4 vco = 1786 MHz
[Check]mt_get_mdl_number 0x2
[EMI] MDL number = 2
[EMI][channel 0]PCDDR3 init start
[EMI][channel 0]PCDDR3 init end
[EMI][channel 1]PCDDR3 init start
[EMI][channel 1]PCDDR3 init end
[EMI][channel 2]PCDDR3 init start
[EMI][channel 2]PCDDR3 init end
CHA_SIZE:512
CHB_SIZE:512
CHC_SIZE:512
824:0x333
CHA_SIZE:512,CHB_SIZE:512,CHC_SIZE:512
CHSEL:04
DRAM Channel_A Pass
DRAM Channel_B Pass
DRAM Channel_C Pass
DDR_Initialize end
dram resize: channel A = 0x20000000, channel B = 0x20000000
Should switch SRAM to security only access...
[nand] u4flag=0x1
[nand] ckgen=0x333, _fgUsingDMA:0x1
before setting :u1DevID[0] : 0x98
after setting :*NFI_ACCCON : 0x10401122 , *NFI_CLK_SEL:0x1041000
NSBC
ARM = 1300MHz 0x1813
PLL1 = 1728MHz 0x2000
PLL2 = 1188MHz 0x1600
LDI
new RSA
u4BlockSize is 0x40000, u4Sz: 0x1000
aMTD Found at 0x400000
RD
Fnr:3
flag:15, inf:37301
version_info not changed!
FLG
F1
N
adjust u4_initrd_size size to :0x3270fe
TZ 13:03:54
U-Boot-2009.08 (Apr 17 2017 - 12:04:03)
I2C: ready
DRAM: 1.5G
NAND: uboot: u1DevID[0] : 0x98
uboot: after setting :*NFI_ACCCON : 0x10401122 , *NFI_CLK_SEL:0x1041110
[nand] read id: 0x98 0xdc 0x90 0x26 0x76 0x16
Nand ECC INFO : 8bit_ecc/512 byte
Nand ID: 98 dc 90 26
512 MiB
u-boot adaptive mtd mechanism applied.
[_i_find_part_tbl] begin to read!!
test here~
return current version .
[_i_find_part_tbl]Part tbl info passed from preloader
pit format is 1~
part number is 0x18.
r_tbl->pc_name: 09679fa8, enc_unit_size:0x0, id:0x40, info: 0x18, no_enc_unit_size:0x0, offset:0x0, size: 0x0~
r_tbl->pc_name: 09679fd0, enc_unit_size:0x0, id:0x1, info: 0x18, no_enc_unit_size:0x0, offset:0x100000, size: 0x200000~
r_tbl->pc_name: 09679ff8, enc_unit_size:0x0, id:0x2, info: 0x38, no_enc_unit_size:0x0, offset:0x300000, size: 0x300000~
r_tbl->pc_name: 0967a020, enc_unit_size:0x0, id:0x3, info: 0x20, no_enc_unit_size:0x0, offset:0x600000, size: 0x300000~
r_tbl->pc_name: 0967a048, enc_unit_size:0x0, id:0x4, info: 0x48, no_enc_unit_size:0x0, offset:0x900000, size: 0x200000~
r_tbl->pc_name: 0967a070, enc_unit_size:0x0, id:0x5, info: 0x58, no_enc_unit_size:0x0, offset:0xB00000, size: 0x200000~
r_tbl->pc_name: 0967a098, enc_unit_size:0x0, id:0x6, info: 0x68, no_enc_unit_size:0x0, offset:0xD00000, size: 0x200000~
r_tbl->pc_name: 0967a0c0, enc_unit_size:0x0, id:0x7, info: 0x78, no_enc_unit_size:0x0, offset:0xF00000, size: 0x200000~
r_tbl->pc_name: 0967a0e8, enc_unit_size:0x0, id:0x8, info: 0x88, no_enc_unit_size:0x0, offset:0x1100000, size: 0x400000~
r_tbl->pc_name: 0967a110, enc_unit_size:0x0, id:0x9, info: 0x98, no_enc_unit_size:0x0, offset:0x1500000, size: 0x400000~
r_tbl->pc_name: 0967a138, enc_unit_size:0x0, id:0xA, info: 0xA8, no_enc_unit_size:0x0, offset:0x1900000, size: 0x400000~
r_tbl->pc_name: 0967a160, enc_unit_size:0x0, id:0xB, info: 0xB8, no_enc_unit_size:0x0, offset:0x1D00000, size: 0x400000~
r_tbl->pc_name: 0967a188, enc_unit_size:0x0, id:0xC, info: 0xC8, no_enc_unit_size:0x0, offset:0x2100000, size: 0x400000~
r_tbl->pc_name: 0967a1b0, enc_unit_size:0x0, id:0xD, info: 0xD8, no_enc_unit_size:0x0, offset:0x2500000, size: 0x800000~
r_tbl->pc_name: 0967a1d8, enc_unit_size:0x0, id:0xE, info: 0xE0, no_enc_unit_size:0x0, offset:0x2D00000, size: 0x1600000~
r_tbl->pc_name: 0967a200, enc_unit_size:0x0, id:0xF, info: 0xF8, no_enc_unit_size:0x0, offset:0x4300000, size: 0x400000~
r_tbl->pc_name: 0967a228, enc_unit_size:0x0, id:0x10, info: 0x2108, no_enc_unit_size:0x0, offset:0x4700000, size: 0xC800000~
r_tbl->pc_name: 0967a250, enc_unit_size:0x800, id:0x11, info: 0x2118, no_enc_unit_size:0x0, offset:0x10F00000, size: 0x200000~
r_tbl->pc_name: 0967a278, enc_unit_size:0x0, id:0x12, info: 0x128, no_enc_unit_size:0x0, offset:0x11100000, size: 0x200000~
r_tbl->pc_name: 0967a2a0, enc_unit_size:0x0, id:0x13, info: 0x138, no_enc_unit_size:0x0, offset:0x11300000, size: 0x300000~
r_tbl->pc_name: 0967a2c8, enc_unit_size:0x0, id:0x14, info: 0x148, no_enc_unit_size:0x0, offset:0x11600000, size: 0x200000~
r_tbl->pc_name: 0967a2f0, enc_unit_size:0x0, id:0x15, info: 0x158, no_enc_unit_size:0x0, offset:0x11800000, size: 0x80000~
r_tbl->pc_name: 0967a318, enc_unit_size:0x0, id:0x16, info: 0x168, no_enc_unit_size:0x0, offset:0x11880000, size: 0x80000~
r_tbl->pc_name: 0967a340, enc_unit_size:0x0, id:0x17, info: 0x3178, no_enc_unit_size:0x0, offset:0x11900000, size: 0xD380000~
r_tbl->pc_name: 0967a368, enc_unit_size:0x0, id:0x18, info: 0x574188, no_enc_unit_size:0x0, offset:0x11900000, size: 0xB400000~
[_i_find_part_tbl] version is 1!!
[_i_get_upg_status_in_nand]upg status passed from preloader
[relocate_env]
Using default environment
u-boot init PT6302 VFD start.!
u-boot VFD say:HELLO !
In: serial
Out: serial
Err: serial
0r_args_to_uboot:
head sig : 0xa0b0ead1
version : 1
boot type : 0
dram ch1 : 0x20000000
dram ch2 : 0x20000000
kern addr : 0x060fffc0
initrd addr : 0x04300000
initrd size : 0x003270fe
enable bim two way write.
Bootloader version 24558
/
0Hit any key to stop autoboot: 0
0
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base #
mt8581_base # +
Unknown command '+' - try 'help'
mt8581_base #
mt8581_base #
mt8581_base # upg usb be all
[UPG]JIG:0 UBI:0
u-boot VFD say:upg BE !
[UPG]upgBEImage loadImage u4ImgStartAddr=0x0, u4ImgSize=0x0
freeLoadImageStartAddr u4pImgStartAddr=0x9668f5c
freeLoadImageStartAddr 2 u4pImgStartAddr=0x9668f5c
[UPG]upg_usb.c call cmd: usb start
(Re)start USB...
USB0: mt8581 EVB board Vbus power on
USB: USB PHY Port 0
USB PHY@0xF0048868 = 0x02044000
USB PHY Port 0
USB PHY@0xF0048868 = 0x02040000
USB PHY Port 0
USB PHY@0xF0048868 = 0x02040000
USB PHY Port 0
USB PHY@0xF004886C = 0x00000000
USB PHY Port 0
USB PHY@0xF0048820 = 0x0000001A
USB PHY Port 0
USB PHY@0xF0048818 = 0x00100482
USB PHY Port 0
USB PHY@0xF0048800 = 0x0000146E
USB PHY Port 0
USB PHY@0xF0048868 = 0x02040008
USB PHY Port 0
USB PHY@0xF004886C = 0x00003E2C
USB PHY Port 0
USB PHY@0xF0048810 = 0x00044414
USB PHY Port 0
USB PHY@0xF0048814 = 0x10A05000
USB PHY Port 0
USB PHY@0xF0048800 = 0x2000146E
USB PHY Port 0
USB PHY@0xF0048804 = 0x44A44403
USB PHY Port 0
USB PHY@0xF0048810 = 0x00045513
USB PHY Port 0
USB PHY@0xF0048818 = 0x001C0482
USB PHY Port 0
USB PHY@0xF0048818 = 0x001C0482
USB PHY Port 0
USB PHY@0xF0048800 = 0x2000146E
USB: pBase = 0xF000E000 init ok.
USB: Init Port0 OK.
USB PHY Port 1
USB PHY@0xF0049868 = 0x02044000
USB PHY Port 1
USB PHY@0xF0049868 = 0x02040000
USB PHY Port 1
USB PHY@0xF0049868 = 0x02040000
USB PHY Port 1
USB PHY@0xF004986C = 0x00000000
USB PHY Port 1
USB PHY@0xF0049820 = 0x0000001A
USB PHY Port 1
USB PHY@0xF0049818 = 0x00100482
USB PHY Port 1
USB PHY@0xF0049800 = 0x0000146E
USB PHY Port 1
USB PHY@0xF0049868 = 0x02040008
USB PHY Port 1
USB PHY@0xF004986C = 0x00003E2C
USB PHY Port 1
USB PHY@0xF0049810 = 0x00044414
USB PHY Port 1
USB PHY@0xF0049814 = 0x10A05000
USB PHY Port 1
USB PHY@0xF0049800 = 0x2000146E
USB PHY Port 1
USB PHY@0xF0049804 = 0x44A44403
USB PHY Port 1
USB PHY@0xF0049810 = 0x00045513
USB PHY Port 1
USB PHY@0xF0049818 = 0x001C0482
USB PHY Port 1
USB PHY@0xF0049818 = 0x001C0482
USB PHY Port 1
USB PHY@0xF0049800 = 0x2000146E
USB: pBase = 0xF000F000 init ok.
USB: Init Port1 OK.
USB: Detected device on port1!
USB: HS device.
scanning bus for devices on port 1...
msd found
1 USB Device(s) found
usb started on port 1.
(0) scanning bus for storage devices...
usb_max_devs(1), usb_max_lun(1)
1 Storage Device(s) found
[UPG]startUSB run_command:usb start ret:1
[UPG]loadImage full path:UPG/MAIN20XCN.bin
reading UPG/MAIN20XCN.bin
** Unable to read "UPG/MAIN20XCN.bin" from usb 0:1 **
[UPG]loadFile run_command:fatload usb 0 0x10000000 UPG/MAIN20XCN.bin ret:-1
[UPG_ERROR]call cmd: fatload usb 0 0x10000000 UPG/MAIN20XCN.bin failed
** Can't read from device 1 **
** Unable to use usb 1:1 for fatload **
[UPG]loadFile run_command:fatload usb 1 0x10000000 UPG/MAIN20XCN.bin ret:-1
[UPG_ERROR]call cmd: fatload usb 1 0x10000000 UPG/MAIN20XCN.bin failed
** Can't read from device 2 **
** Unable to use usb 2:1 for fatload **
[UPG]loadFile run_command:fatload usb 2 0x10000000 UPG/MAIN20XCN.bin ret:-1
[UPG_ERROR]call cmd: fatload usb 2 0x10000000 UPG/MAIN20XCN.bin failed
[UPG_ERROR]loadFile failed
[UPG]loadImage after usbGetImage u4pImgStartAddr:0x10000000, u4pImgSize=0x0
[UPG_ERROR] loadBEImage from USB failed
[UPG]reloadBE loadImage u4ImgStartAddr=0x10000000, u4ImgSize=0x0
[UPG_ERROR]reloadBE loadImage failed
freeLoadImageStartAddr u4pImgStartAddr=0x9668f5c
freeLoadImageStartAddr 2 u4pImgStartAddr=0x9668f5c
[UPG]upgBEImage loadImage u4ImgStartAddr=0x0, u4ImgSize=0x0
[UPG_ERROR] upgBEImage loadImage failed
freeLoadImageStartAddr u4pImgStartAddr=0x9668f5c
freeLoadImageStartAddr 2 u4pImgStartAddr=0x9668f5c
u-boot VFD say:upg BE fail!
[UPG]Upgrade image failed
u-boot VFD say:upg BE fail!
 
Hello,
I hope someone can help me.
I want to update my V3 with the firmware of the first page.
All steps work except the last "upg usb be all" step.
I tested many different usb drives and computer but without success.
Does anyone know where the issue is?

In the log you can read:

[UPG]loadImage full path:UPG/MAIN20XCN.bin
reading UPG/MAIN20XCN.bin
** Unable to read "UPG/MAIN20XCN.bin" from usb 0:1 **
[UPG]loadFile run_command:fatload usb 0 0x10000000 UPG/MAIN20XCN.bin ret:-1
[UPG_ERROR]call cmd: fatload usb 0 0x10000000 UPG/MAIN20XCN.bin failed
** Can't read from device 1 **

So, it looks clearly that the file "UPG/MAIN20XCN.bin" cannot be read.

Assuming all the previous steps are correct, double check the following:

- Use a good USB 2.0 pendrive of not too much capacity. You talk about tested many different usb drives. What drives?
- Format it previously to FAT32 from Windows.
- Create a folder, in the pendrive , at first level, named UPG
- Copy the firmware file to that folder. The content on pendrive should be: pendrive:\UPG\MAIN20XCN.bin

If still not working, I do not know what could be the reason. Obviously it is a non properly working Chinoppo USB port or using a USB pendrive not supported by the Chinoppo.

According to My Opinion:
On the other hand, please consider the risk/benefit of this upgrade.
If you have a properly working Chinoppo, this firmware upgrade does not add any additional valuable functionality, for me.
 
Última edición:
In the log you can read:

[UPG]loadImage full path:UPG/MAIN20XCN.bin
reading UPG/MAIN20XCN.bin
** Unable to read "UPG/MAIN20XCN.bin" from usb 0:1 **
[UPG]loadFile run_command:fatload usb 0 0x10000000 UPG/MAIN20XCN.bin ret:-1
[UPG_ERROR]call cmd: fatload usb 0 0x10000000 UPG/MAIN20XCN.bin failed
** Can't read from device 1 **

So, it looks clearly that the file "UPG/MAIN20XCN.bin" cannot be read.

Assuming all the previous steps are correct, double check the following:

- Use a good USB 2.0 pendrive of not too much capacity. You talk about tested many different usb drives. What drives?
- Format it previously to FAT32 from Windows.
- Create a folder, in the pendrive , at first level, named UPG
- Copy the firmware file to that folder. The content on pendrive should be: pendrive:\UPG\MAIN20XCN.bin

If still not working, I do not know what could be the reason. Obviously it is a non properly working Chinoppo USB port or using a USB pendrive not supported by the Chinoppo.

According to My Opinion:
On the other hand, please consider the risk/benefit of this upgrade.
If you have a properly working Chinoppo, this firmware upgrade does not add any additional valuable functionality, for me.
I tested my 9th pendrive and that worked.
Thanks for your support.
 
Y volviendo con el tema de los subtítulos...

He notado que a mí me salen a trompicones. Como si se cargase solo la mitad superior y luego la mitad inferior de la línea de texto.

No aparecen y desaparecen instantaneamente. ¿Os pasa tambien a vosotros?
 
Atrás
Arriba